M16-G2CS
GOST 12337-84
Motor oil M-16G2CS is designed to lubricate the cylinders of the tube and crosshead diesel engines with lubricators, when the mass fraction of sulfur in the fuel used is not more than 1.5%; can be used to lubricate a number of ship mechanisms and units, where the oil is required corresponding viscosity (gearboxes, compressors, blowers, etc.) consist of mixtures of distillate and residual components produced from sulfur and low-sulfur oils and effective additives. It has good moisture resistance, low emulsifiability with water and easy separation of water during separation.
| Index name | Norm |
|---|---|
| Viscosity kinematic, mm2/s, at 100°C | 15,5-17,0 |
| Viscosity index, not less than | 92 |
| Alkaline number, mg KOH/ g, not less | 9,0 |
| Ash sulphate,%, not more | 1,5 |
| Mass fraction of mechanical impurities,%, not more | 0,01 |
| Temperature, °С: | |
|
Flash Point, COC
|
210 |
|
Pour Point
|
-10 |
| Degree of purity, mg/100g of oil, not more | 600 |
| Tribological characteristics at the temperature of (20±5)°С: | |
|
index of bully, kgf
|
34 |
|
critical load, Н, not less
|
823 |
|
wear indicator at constant load 196Н, mm, no more than
|
0,4 |
| Density at 20°C, kg/m3, not more than | 910 |
| Mass fraction of active elements,%, not less: | |
|
кальция
|
0,28 |
|
zinc's
|
0,045 |
|
phosphorus's
|
0,04 |
| Stability on induction period of sedimentation (IPO), withstands, h | 50 |
| Water washout of additives: | |
|
reduction of alkaline number,%, not more
|
10 |
|
lower ash content, %, not more
|
10 |
|
emulsifiability with water, cm3, not more
|
0,5 |
